Introduction
Having a refrigerator that doesn't work properly can be very frustrating, especially when your food starts to spoil. But don't worry, you don't have to spend a lot of money to fix it. In this article, we will discuss
How to Replace Common Refrigerator Parts and Save Money.
The Thermostat
The thermostat is the part of the refrigerator that controls the temperature. If your refrigerator is not cooling properly, it might be because of a faulty thermostat. You can replace it yourself by unplugging the refrigerator, removing the thermostat cover and replacing the old thermostat with a new one.
The Start Relay
The start relay is a small part in your refrigerator that helps the compressor start. If your refrigerator is not cooling at all, it's possible that the start relay is not working. You can replace it yourself by unplugging the refrigerator, removing the start relay cover and replacing the old start relay with a new one.
The Condenser Fan Motor
The condenser fan motor is responsible for circulating air over the condenser coil to help dissipate heat. If your refrigerator is not cooling properly, it could be because of a faulty condenser fan motor. You can replace it yourself by unplugging the refrigerator, removing the cover to access the fan motor and replacing the old fan motor with a new one.
The Defrost Timer
The defrost timer is responsible for turning on the defrost heater to melt away any ice that has accumulated on the evaporator coil. If your refrigerator is not cooling properly or if there is a build-up of ice in the freezer, it might be because of a faulty defrost timer. You can replace it yourself by unplugging the refrigerator, locating the defrost timer and removing the old one. Replace it with a new one.
The Door Gasket
The door gasket is the rubber seal that goes around the edge of your refrigerator door. If your refrigerator is not cooling properly, it's possible that the door gasket is worn out or has torn. You can replace it yourself by removing the old door gasket and attaching the new one with adhesive.
The Water Inlet Valve
The water inlet valve is responsible for controlling the flow of water into your refrigerator's ice maker and water dispenser. If you are not getting any water or if the ice cubes are too small, it might be because of a faulty water inlet valve. You can replace it yourself by unplugging the refrigerator, locating the water inlet valve and removing the old one. Replace it with a new one.
The Evaporator Fan Motor
The evaporator fan motor is responsible for circulating air over the evaporator coils to help cool the refrigerator. If your refrigerator is not cooling properly, it could be because of a faulty evaporator fan motor. You can replace it yourself by unplugging the refrigerator, accessing the evaporator fan motor through the freezer compartment and replacing the old fan motor with a new one.
The Compressor
The compressor is the part of your refrigerator that compresses the refrigerant gas and pumps it through the condenser coils to release heat. If your refrigerator is not cooling at all, it's possible that the compressor is not working. This is the most expensive part to replace, so you might want to consider having a professional do it for you.
Cleaning the Coils
One of the most common reasons why refrigerators stop working is because the coils are dirty. If you haven't cleaned your coils in a while, it's possible that they are clogged with dirt and dust. You can clean them yourself by unplugging the refrigerator, locating the coils and vacuuming or dusting them off.
Conclusion
Replacing common refrigerator parts is easier than you might think and can save you a lot of money. Just make sure you unplug the refrigerator before doing any repairs and use caution when working with electrical parts.
Quote Inquiry
Contact us
